Pilatus PC-9 1/72 Kovozávody Prostějov

Loňský rok končil příspěvkem na téma nová kovozávodská PC-9, letošní rok začne příspěvkem na stejné téma. Další PC-9 postavil náš kamarád z Irska, Roy Kinsella. Sám k tomu napsal: 

Konečně vstřikovaná plastová stavebnice báječné rodiny PC-9. V Irsku byla tato zpráva přijata s velkým nadšením. Jedna krabice těchto nově vyrobených stavebnic krásně ilustruje Irish Air Corps PC-9M a letoun je zde oblíbeným námětem mezi leteckými modeláři. Po otevření krabice je rychle zřejmé, že tato sada je ideální pro víkendový projekt. Byl jsem ohromen díly, které byly ostré a čisté, s jemnými liniemi panelu podél povrchu. U většiny dílů bylo potřeba jen velmi malé čištění. Stavba byla jednoduchá, stavebnice šla pěkně do sebe a bez větší námahy. Počínaje montáží kokpitu jde proces přímo vpřed a interiér pěkně sedí uvnitř obou polovin trupu. Jen jsem vyměnil vystřelovací sedačky a přidal malý detail na HUD. Dvě části trupu jsou úhledně spojeny dohromady, což umožňuje, aby čirý překryt bez námahy zapadl na místo. Sada nabízí jak standardní vertikální stabilizátor, tak i unikátní pro PC-9M. Montáž zadní části proběhla bez problémů. Následovala montáž hlavních křídel. Připojování trupu k hlavním křídlům vyžadovalo trochu trpělivosti, ale po dokončení jsem celý proces pochopil lépe. Po sestavení hlavní části trupu jsem přidal další drobný detail na trup, který je jedinečný pro irský PC-9M. Vpřed jsem sestavil vrtulový kužel, která přesně zachycuje správný úhel, na který jsou listy vrtule PC-9 nastaveny. Připravil jsem i podvozek na finální montáž. Opravdu jsem chtěl postavit PC-9M s namontovanými zbraňovými systémy, i když to nebylo součástí této sady, měl jsem již požadované podvěsy pro trh s náhradními díly, takže jsem se rozhodl je použít zde. Pro malování jsem si barvy namíchal sám pomocí Tamiya Acrylics a dokončil stavbu jako č.260. Přidal jsem několik štítků ariels a Photo-Etch ‚Remove Before Flight‘, abych dokončil sestavení. Celkově byla tato stavebnice skvělá zábava na dokončení, vyžadovalo to málo času a úsilí a nakonec jsem byl potěšen dokončeným dílem. Vysoce doporučený a obohacující model za velmi štědrou cenu.

Last year ended with a post on the new KP PC-9, this year will start with a post on the same topic. Another PC-9 was built by our friend from Ireland, Roy Kinsella. He himself wrote about it:

At last, an Injected plastic kit of the wonderful PC-9 family. In Ireland this news was received with great excitement. One boxing of these newly produced kits beautifully illustrate an Irish Air Corps PC-9M, and the aircraft is a popular subject among aircraft modellers here. On opening the box it is quickly apparent that this kit is perfect for a weekend project.
I was impressed with the parts, which were crisp and clean, with fine panel lines along the surfaces. Very little cleaning was required with the majority of the parts.Construction was a simple process, the kit went together nicely and without much effort. Beginning with the assembly of the cockpit, the process is straight forward and the tub sits nicely inside the two fuselage halves. I just exchanged the ejection seats with after market ones and added a little detail to the HUD. The two fuselage sections attach neatly together allowing the clear canopy to fit effortlessly in place after. The kit offers both the standard vertical stabilizer and the unique one for the PC-9M. Assembly of the back end went together without any difficulty.Assembly of the main wings was next. Wedding the fuselage to the main wings needed a little patience but I understood the process better after completing it. Having the main body assembled I added additional slight detail to the fuselage that is unique to the Irish PC-9M. Moving forward, I assembled the main prop, which captures accurately the correct angle the PC-9 blades are set at.
I also readied the undercarriage for final assembly. I really wanted to build the PC-9M with its weapon systems mounted, although not included in this kit, I had already the required aftermarket pods, so I decided to use them here. For painting I mixed the colours myself using Tamiya Acrylics and finished the build as No.260. I added some ariels and Photo-Etch ‚Remove Before Flight‘ tags to complete the build. Overall this kit was great fun to complete, It required little time and effort and ultimately I was delighted with the completed piece.
A highly recommended and rewarding model, with at a very generous price tag.

Roy pod PC-9 rovnou podvěsil kulometná a raketová pouzdra. My tyto a další doplňky pro letoun PC-9 představíme v novinkách na leden, které zveřejníme v průběhu příštího týdne.

Roy put machine gun and rocket cases right under the PC-9. We will feature these and other accessories for the PC-9 in our January newsletter, which will be published within the next week.